- DHW storage capacity
-
53 USG (200 L) for CVWC-53
66 USG (250 L) for CVWC-66
79 USG (300 L) for CVWC-79 - DHW tank draw volume at 113°F (45°C)
-
87 USG (330 L) for CVWC-53
109 USG (412 L) for CVWC-66
131 USG (495 L) for CVWC-79Without reheating with a tank temperature of 140°F (60°C).
- Weight (with insulation)
-
214 lbs (97 kg) for CVWC-53
245 lbs (111 kg) for CVWC-66
278 lbs (126 kg) for CVWC-79 - Overall dimensions (with insulation)
-
- Length (diameter)
-
26¼ inches (668 mm) for all models
- Width
-
28¼ inches (714 mm) for all models
- Height
-
48½ inches (1229 mm) for CVWC-53
56½ inches (1430 mm) for CVWC-66
67 inches (1697 mm) for CVWC-79 - Warranty
-
Limited 10 year warranty for the heat exchanger coil and tank in residential applications, and 2 year warranty for the insulation jacket and accessories. See warranty sheet for details.
- More details
Vitocell 100-V
Efficient and space saving indirect DHW tanks for heat pumps
Steel domestic hot water tank with Ceraprotect enamel coating for use with the Vitocal 100-AW heat pump system. Capacity: 53, 66 and 79 USG / 200, 250 and 300 L
Long service life
The impressed current anode and Ceraprotect enamel coating protects against corrosion.
Designed for heat pumps
Modular indirect DHW tank is designed to pair with our Vitocal 100-AW heat pumps.
Minimal heat losses
Highly effective HCFC-free foam insulation reduces standby losses.
Low lead content
Conforms with CSA Low Lead Content Certification Program, including US Safe Drinking Water Act, NSF/ANSI 372.
Easier transport
With integrated carrying handles at the top and bottom of each Vitocell 100-V tank.
Hot water comfort
Supply DHW all day long with large heat exchanger surfaces.
Vitocell 100-V DHW tank with Vitocell 100-E buffer tank (stacked on top) and Vitocal 100-AW heat pump
Meet the newest addition to the Vitocell family!
Viessmann has developed new DHW indirect tanks designed for pairing with the Vitocal air-to-water heat pump and system water buffer tank included with the Vitocal 100-AW.
A unique feature is the modular design to meet different requirements in new build and modernization projects. This allows for the most efficient use of the installation area, which is often small in new buildings. Vitocell 100-E modular buffer tanks are conveniently designed to allow installation nested on top of Vitocell 100-V DHW tanks for maximum flexibility and space savings.
Easy transport into mechanical room
In modernization projects, maneuverability is often a challenge. The separate tank modules and integrated carry handles on the DHW tanks facilitate easier transport that installers will appreciate.
Integrated carrying handles at the top and bottom of each Vitocell 100-V tank
Designed for low temperature heat pump applications
Compared to conventional DHW indirect tanks, the new Vitocell 100-V (type CVWC) has larger heat exchanger surfaces specifically designed to match the lower flow temperatures of heat pumps. A wear-free impressed current anode, in conjunction with the Ceraprotect enamel coating, guarantees reliable corrosion protection.
Flexible options with the system water buffer tank
Included with the Vitocal 100-AW heat pump, the Vitocell 100-E system water buffer tank (type MSCA) comes with a capacity of 20 USG (75 L) and is suitable for heating and cooling thanks to its highly effective thermal insulation.
The modular buffer tank can be placed on top of the Vitocell 100-V tank requiring an installation area of less than 6 ft² (0.5 m²). To allow easy implementation of the system-side connection, the system water buffer tank can be rotated 360 degrees.
Advantages of the Vitocell 100-V DHW tank
Look inside the tank
- Vitocell 100-E buffer tank (stacked on top)
- Highly effective all-round thermal insulation
- Steel buffer tank body
- Vitocell 100-V steel DHW tank with Ceraprotect enamel coating
- Impressed current anode
- Large indirect coil optimized for use with heat pumps
- Inspection and clean-out opening
